Nanopore DNA Sequencing and Genome Assembly on the International Space Station.

We evaluated the performance of the MinION DNA sequencer in-flight on the International Space Station (ISS), and benchmarked its performance off-Earth against the MinION, Illumina MiSeq, and PacBio RS II sequencing platforms in terrestrial laboratories. Samples contained equimolar mixtures of genomic DNA from lambda bacteriophage, Escherichia coli (strain K12, MG1655) and Mus musculus (female BALB/c mouse). Nine sequencing runs were performed aboard the ISS over a 6-month period, yielding a total of 276,882 reads with no apparent decrease in performance over time. From sequence data collected aboard the ISS, we constructed directed assemblies of the ~4.6 Mb E. coli genome, ~48.5 kb lambda genome, and a representative M. musculus sequence (the ~16.3 kb mitochondrial genome), at 100%, 100%, and 96.7% consensus pairwise identity, respectively; de novo assembly of the E. coli genome from raw reads yielded a single contig comprising 99.9% of the genome at 98.6% consensus pairwise identity. Simulated real-time analyses of in-flight sequence data using an automated bioinformatic pipeline and laptop-based genomic assembly demonstrated the feasibility of sequencing analysis and microbial identification aboard the ISS. These findings illustrate the potential for sequencing applications including disease diagnosis, environmental monitoring, and elucidating the molecular basis for how organisms respond to spaceflight.

Nanopore sequencing in microgravity.

Rapid DNA sequencing and analysis has been a long-sought goal in remote research and point-of-care medicine. In microgravity, DNA sequencing can facilitate novel astrobiological research and close monitoring of crew health, but spaceflight places stringent restrictions on the mass and volume of instruments, crew operation time, and instrument functionality. The recent emergence of portable, nanopore-based tools with streamlined sample preparation protocols finally enables DNA sequencing on missions in microgravity. As a first step toward sequencing in space and aboard the International Space Station (ISS), we tested the Oxford Nanopore Technologies MinION during a parabolic flight to understand the effects of variable gravity on the instrument and data. In a successful proof-of-principle experiment, we found that the instrument generated DNA reads over the course of the flight, including the first ever sequenced in microgravity, and additional reads measured after the flight concluded its parabolas. Here we detail modifications to the sample-loading procedures to facilitate nanopore sequencing aboard the ISS and in other microgravity environments. We also evaluate existing analysis methods and outline two new approaches, the first based on a wave-fingerprint method and the second on entropy signal mapping. Computationally light analysis methods offer the potential for in situ species identification, but are limited by the error profiles (stays, skips, and mismatches) of older nanopore data. Higher accuracies attainable with modified sample processing methods and the latest version of flow cells will further enable the use of nanopore sequencers for diagnostics and research in space.

Development of a multiplex PCR assay for detection of Shiga toxin-producing Escherichia coli, enterohemorrhagic E. coli, and enteropathogenic E. coli strains.

Escherichia coli O157:H7 and other pathogenic E. coli strains are enteric pathogens associated with food safety threats and which remain a significant cause of morbidity and mortality worldwide. In the current study, we investigated whether enterohemorrhagic E. coli (EHEC), Shiga toxin-producing E. coli (STEC), and enteropathogenic E. coli (EPEC) strains can be rapidly and specifically differentiated with multiplex PCR (mPCR) utilizing selected biomarkers associated with each strain's respective virulence genotype. Primers were designed to amplify multiple intimin (eae) and long polar fimbriae (lpfA) variants, the bundle-forming pilus gene bfpA, and the Shiga toxin-encoding genes stx1 and stx2. We demonstrated consistent amplification of genes specific to the prototype EHEC O157:H7 EDL933 (lpfA1-3, lpfA2-2, stx1, stx2, and eae-γ) and EPEC O127:H6 E2348/69 (eae-α, lpfA1-1, and bfpA) strains using the optimized mPCR protocol with purified genomic DNA (gDNA). A screen of gDNA from isolates in a diarrheagenic E. coli collection revealed that the mPCR assay was successful in predicting the correct pathotype of EPEC and EHEC clones grouped in the distinctive phylogenetic disease clusters EPEC1 and EHEC1, and was able to differentiate EHEC1 from EHEC2 clusters. The assay detection threshold was 2 × 10(4) CFU per PCR reaction for EHEC and EPEC. mPCR was also used to screen Argentinean clinical samples from hemolytic uremic syndrome and diarrheal patients, resulting in 91% sensitivity and 84% specificity when compared to established molecular diagnostic procedures. In conclusion, our mPCR methodology permitted differentiation of EPEC, STEC and EHEC strains from other pathogenic E. coli; therefore, the assay becomes an additional tool for rapid diagnosis of these organisms.

Identification of Coli Surface Antigen 23, a novel adhesin of enterotoxigenic Escherichia coli.

Enterotoxigenic Escherichia coli (ETEC) is an important cause of diarrhea, mainly in developing countries. Although there are 25 different ETEC adhesins described in strains affecting humans, between 15% and 50% of the clinical isolates from different geographical regions are negative for these adhesins, suggesting that additional unidentified adhesion determinants might be present. Here, we report the discovery of Coli Surface Antigen 23 (CS23), a novel adhesin expressed by an ETEC serogroup O4 strain (ETEC 1766a), which was negative for the previously known ETEC adhesins, albeit it has the ability to adhere to Caco-2 cells. CS23 is encoded by an 8.8-kb locus which contains 9 open reading frames (ORFs), 7 of them sharing significant identity with genes required for assembly of K88-related fimbriae. This gene locus, named aal (adhesion-associated locus), is required for the adhesion ability of ETEC 1766a and was able to confer this adhesive phenotype to a nonadherent E. coli HB101 strain. The CS23 major structural subunit, AalE, shares limited identity with known pilin proteins, and it is more closely related to the CS13 pilin protein CshE, carried by human ETEC strains. Our data indicate that CS23 is a new member of the diverse adhesin repertoire used by ETEC strains.

Long polar fimbriae of enterohemorrhagic Escherichia coli O157:H7 bind to extracellular matrix proteins.

Adherence to intestinal cells is a key process in infection caused by enterohemorrhagic Escherichia coli (EHEC). Several adhesion factors that mediate the binding of EHEC to intestinal cells have been described, but the receptors involved in their recognition are not fully characterized. Extracellular matrix (ECM) proteins might act as receptors involved in the recognition of enteric pathogens, including EHEC. In this study, we sought to characterize the binding of EHEC O157:H7 to ECM proteins commonly present in the intestine. We found that EHEC prototype strains as well as other clinical isolates adhered more abundantly to surfaces coated with fibronectin, laminin, and collagen IV. Further characterization of this phenotype, by using antiserum raised against the LpfA1 putative major fimbrial subunit and by addition of mannose, showed that a reduced binding of EHEC to ECM proteins was observed in a long polar fimbria (lpf) mutant. We also found that the two regulators, H-NS and Ler, had an effect in EHEC Lpf-mediated binding to ECM, supporting the roles of these tightly regulated fimbriae as adherence factors. Purified Lpf major subunit bound to all of the ECM proteins tested. Finally, increased bacterial adherence was observed when T84 cells, preincubated with ECM proteins, were infected with EHEC. Taken together, these findings suggest that the interaction of Lpf and ECM proteins contributes to the EHEC colonization of the gastrointestinal tract.

Intact flagellar motor of Borrelia burgdorferi revealed by cryo-electron tomography: evidence for stator ring curvature and rotor/C-ring assembly flexion.

The bacterial flagellar motor is a remarkable nanomachine that provides motility through flagellar rotation. Prior structural studies have revealed the stunning complexity of the purified rotor and C-ring assemblies from flagellar motors. In this study, we used high-throughput cryo-electron tomography and image analysis of intact Borrelia burgdorferi to produce a three-dimensional (3-D) model of the in situ flagellar motor without imposing rotational symmetry. Structural details of B. burgdorferi, including a layer of outer surface proteins, were clearly visible in the resulting 3-D reconstructions. By averaging the 3-D images of approximately 1,280 flagellar motors, a approximately 3.5-nm-resolution model of the stator and rotor structures was obtained. flgI transposon mutants lacked a torus-shaped structure attached to the flagellar rod, establishing the structural location of the spirochetal P ring. Treatment of intact organisms with the nonionic detergent NP-40 resulted in dissolution of the outermost portion of the motor structure and the C ring, providing insight into the in situ arrangement of the stator and rotor structures. Structural elements associated with the stator followed the curvature of the cytoplasmic membrane. The rotor and the C ring also exhibited angular flexion, resulting in a slight narrowing of both structures in the direction perpendicular to the cell axis. These results indicate an inherent flexibility in the rotor-stator interaction. The FliG switching and energizing component likely provides much of the flexibility needed to maintain the interaction between the curved stator and the relatively symmetrical rotor/C-ring assembly during flagellar rotation.

Detailed analysis of sequence changes occurring during vlsE antigenic variation in the mouse model of Borrelia burgdorferi infection.

Lyme disease Borrelia can infect humans and animals for months to years, despite the presence of an active host immune response. The vls antigenic variation system, which expresses the surface-exposed lipoprotein VlsE, plays a major role in B. burgdorferi immune evasion. Gene conversion between vls silent cassettes and the vlsE expression site occurs at high frequency during mammalian infection, resulting in sequence variation in the VlsE product. In this study, we examined vlsE sequence variation in B. burgdorferi B31 during mouse infection by analyzing 1,399 clones isolated from bladder, heart, joint, ear, and skin tissues of mice infected for 4 to 365 days. The median number of codon changes increased progressively in C3H/HeN mice from 4 to 28 days post infection, and no clones retained the parental vlsE sequence at 28 days. In contrast, the decrease in the number of clones with the parental vlsE sequence and the increase in the number of sequence changes occurred more gradually in severe combined immunodeficiency (SCID) mice. Clones containing a stop codon were isolated, indicating that continuous expression of full-length VlsE is not required for survival in vivo; also, these clones continued to undergo vlsE recombination. Analysis of clones with apparent single recombination events indicated that recombinations into vlsE are nonselective with regard to the silent cassette utilized, as well as the length and location of the recombination event. Sequence changes as small as one base pair were common. Fifteen percent of recovered vlsE variants contained "template-independent" sequence changes, which clustered in the variable regions of vlsE. We hypothesize that the increased frequency and complexity of vlsE sequence changes observed in clones recovered from immunocompetent mice (as compared with SCID mice) is due to rapid clearance of relatively invariant clones by variable region-specific anti-VlsE antibody responses.

Identification of potential virulence determinants by Himar1 transposition of infectious Borrelia burgdorferi B31.

Lyme disease Borrelia organisms are highly invasive spirochetes that alternate between vertebrate and arthropod hosts and that establish chronic infections and elicit inflammatory reactions in mammals. Although progress has been made in the targeted mutagenesis of individual genes in infectious Borrelia burgdorferi, the roles of the vast majority of gene products in pathogenesis remain unresolved. In this study, we examined the feasibility of using transposon mutagenesis to identify infectivity-related factors in B. burgdorferi. The transformable, infectious strain 5A18 NP1 was transformed with the spirochete-adapted Himar1 transposon delivery vector pMarGent to create a small library of 33 insertion mutants. Single mouse inoculations followed by culture of four tissue sites and serology were used to screen the mutants for infectivity phenotypes. Mutants that appeared attenuated (culture positive at some sites) or noninfectious (negative at all sites) and contained the virulence-associated plasmids lp25 and lp28-1 were examined in more extensive animal studies. Three of these mutants (including those with insertions in the putative fliG-1-encoded flagellar motor switch protein and the guaB-encoded IMP dehydrogenase) were noninfectious, whereas four clones appeared to exhibit reduced infectivity. Serological reactivity in VlsE enzyme-linked immunosorbent assays correlated with the assignment of mutants to the noninfectious or attenuated-infectivity groups. The results of this study indicate that random transposon mutagenesis of infectious B. burgdorferi is feasible and will be of value in studying the pathogenesis of Lyme disease Borrelia.

Characterization of the vls antigenic variation loci of the Lyme disease spirochaetes Borrelia garinii Ip90 and Borrelia afzelii ACAI.

The vls locus of Borrelia burgdorferi B31 consists of 15 silent cassettes and one expression site (vlsE), and the presence of the encoding plasmid lp28-1 correlates with high infectivity. Recombination between the expression cassette and silent cassettes occurs in vivo, and this process may enable B. burgdorferi to evade the immune response. To determine the characteristics of the vls loci in other Borrelia strains, we have cloned and characterized the vls silent cassette loci of Borrelia garinii Ip90 and Borrelia afzelii ACAI, consisting of 11 vls silent cassettes and 14 vls silent cassettes respectively. The silent cassettes share 90-97% nucleotide sequence identity with one another within the Ip90 vls locus and 84-91% within the ACAI vls locus. In both organisms, the silent cassettes resemble the B31 Vls sequences in overall amino acid similarity (50-65%) and in the presence of six variable regions interspersed between six relatively invariant regions. The vlsE expression sites of these two strains have not been isolated, but transcripts of vlsE were detected by reverse transcriptase-polymerase chain reaction for both Ip90 and ACAI. In addition, the occurrence of sequence variation within the vlsE cassette region of these transcripts was verified. This study indicates that the vls loci present in B. garinii Ip90 and B. afzelii ACAI have characteristics similar to those found in B. burgdorferi B31.